Introduction

Portable Band Saw Blades for Wood are ring-shaped cutting tools for portable band saw equipment, used for cutting various types of wood and wood materials containing frost or high density.

14527

Specification

Material	High-Carbon Alloy Steel
Width	3mm / 6mm / 10mm / 13mm / 16mm
Length	Customizable
Thickness	0.64mm
Hardness	Tooth Tip HRC 64+ / Backing Material HRC > 46
Tooth Count (TPI)	4 / 6 / 8 / 14
Tooth Angle	10° (General Purpose) / 7° (Hardwood) / 4° (Extremely Hard or Frozen Wood)
MOQ	20 pieces

Features

Wide Adaptability

4/6/8/14 TPI controls the cutting load and chip removal space per tooth by varying the number of teeth per unit length. Low TPI corresponds to high chip removal capacity (softwood/wet wood), while high TPI corresponds to multiple teeth participating in cutting (hardwood/high-density wood).

Clear Division of Labor
The tooth tip HRC 64+ is used to resist wear from fibers and hard nodules, while the backing material HRC > 46 is used to withstand bending stress, allowing cutting and load-bearing to be handled by different hardness zones.

Size Adaptability
Widths of 3–16mm and customizable lengths correspond to different portable saw wheel diameters and machine tensioning structures, allowing the same structural system to cover different equipment geometry parameters.

Applications

Timber Processing Industry: Used for cutting logs, boards, and components, providing a dimensional basis for subsequent processing.

Furniture Manufacturing Industry: Used for cutting solid wood and composite wood materials, bringing components into standard processing size ranges.

Construction and Decoration Industry: Used for on-site cutting and trimming of timber structures, adapting to mobile construction scenarios.

Landscape and Maintenance Industry: Used for tree pruning and branch cutting, handling wood materials of different densities.

Packing

About Us

page-758-491

Our Certificate

FAQ

Q: How to choose TPI based on wood type?

A: TPI determines the number of teeth involved in cutting per unit length and the chip clearance space. Low TPI (4/6) is suitable for loosely fibrous or wet wood, while high TPI (8/14) is used for hardwoods or high-density materials to avoid excessive load on a single tooth.

Q: Why does the same saw blade require different tooth angles?

A: 10° is used for general wood cutting, 7° is used to improve hardwood cutting stability, and 4° reduces the depth of cut per tooth by decreasing the rake angle, used for high-hardness or frozen woods to control impact loads.

Q: What factors usually cause saw blades to wear too quickly?

A: It is mainly related to whether the tooth tip hardness (HRC 64+) matches the material. When cutting materials containing sand, ice crystals, or high-density fibers, exceeding the tooth wear limit will lead to rapid dulling. The tooth pitch or tooth angle should be adjusted.

Contact now

Hot Tags: portable band saw blades for wood, China portable band saw blades for wood manufacturers, suppliers, factory, Bandsaw Blades for Resawing Wood, Carbide Tipped Bandsaw Blades for Wood, Tct Bandsaw Blade, Tungsten Carbide Bandsaw Blades, Portable Band Saw Blades for Wood, Bi metal Bandsaw Blades for Wood