Introduction

Woodworking band saw blades are used for straight and curved cutting of wood and some soft metals and plastics, and are suitable for sawing, furniture making and multi-material processing scenarios.

13694

Specification

Saw Blade Width	Thickness	Saw Kerf Width	Tooth Profile Specifications
3mm	0.64mm	1mm	38T / 68T
6mm	0.64mm	1mm	108T
13mm	0.82mm	1.6mm	134T / 164T

Features

High-hardness cutting
The tooth tip hardness is ≥HRC64. A high-carbon steel matrix combined with a quenching process creates a high-hardness surface structure, allowing for localized material separation upon contact with wood fibers in the cutting zone.

Cutting impact dispersion structure
The arc-shaped bevel tooth profile alters the feed angle, transforming the cutting force from an instantaneous impact into a gradual penetration into the material, thereby reducing the concentration of instantaneous fiber breakage.

Low material loss
The kerf width is approximately 1.0–1.6 mm, maximizing board utilization in a single cut by reducing the material removal volume.

Applications

Furniture Manufacturing Industry: Used for initial shaping of boards, solid wood components, and mortise and tenon joints, bringing logs or boards to standardized processing dimensions.

Primary Timber Processing Industry: Used for splitting and segmenting logs, processing raw wood into basic blanks suitable for drying and further processing.

Crafts and Curved Surface Processing Industry: Used for cutting musical instruments, wood carvings, and curved structural components, achieving basic shaping of complex contours.

Lightweight Materials Processing Industry: Used for basic cutting of aluminum, copper, and plastic materials, completing the dimensional division of non-rigid materials.

Comprehensive Customization

Tailor-made solutions include:

Tooth Profile Design (Trapezoidal, Flat, Dual Profiles)

Tooth Pitch & Thickness adjustments for material density

Blade width & thickness customization for specific machines.

Shipping & Delivery

About Us

page-758-491

Our Certificate

FAQ

Q: How to choose the number and shape of teeth?

A: Fewer teeth correspond to larger cutting volumes and faster feed rates, while more teeth improve control over the details of the cutting edge. Trapezoidal teeth are used for straight-line cutting, while mixed teeth are used for curved or complex path machining.

Q: How to adjust for chipping when cutting wood?

A: This can be achieved by reducing the feed rate or selecting a denser tooth configuration, which lowers the cutting load per tooth, thereby reducing the concentrated area of instantaneous fiber breakage.

Q: How does the hardness of different types of wood affect tool selection?

A: High-density hardwoods require higher tooth tip hardness and a smaller tooth pitch to distribute the cutting load, while softwoods can use a larger tooth pitch to increase the amount of material removed per pass.

Contact now

Hot Tags: cutting bandsaw wood, China cutting bandsaw wood manufacturers, suppliers, factory, Bandsaw Blades for Resawing Wood, Carbide Tipped Bandsaw Blades for Wood, Tct Bandsaw Blade, Tungsten Carbide Bandsaw Blades, Portable Band Saw Blades for Wood, Bi metal Bandsaw Blades for Wood