Introduction

Bandsaw Blades for Resawing Wood are ring-shaped cutting tools used in band saw equipment to cut thick timber into thin boards or multi-layer boards along the fiber direction.

15608

Specification

Parameter	Specification
Material	High-Carbon Alloy Steel
Width	3mm / 6mm / 10mm / 13mm / 16mm
Length	Customizable
Thickness	0.64mm
Hardness	Tooth Tip HRC 64+ / Backing Material HRC > 46
Tooth Count (TPI)	4 / 6 / 8 / 14
Tooth Angle	10° (General Purpose) / 7° (Hardwood) / 4° (Extremely Hard or Frozen Wood)
MOQ	20 pieces

Features

Low Cutting Offset

A 10–16mm width increases the saw blade's lateral stiffness, reducing lateral offset caused by the release of internal stress in the wood during longitudinal sectioning, resulting in a more linear cutting path.

Layered Processing Capable

4/6/8/14 TPI adjusts the single-tooth cutting depth and chip removal space by the number of teeth per unit length. High TPI reduces the single-tooth cutting amount for low-vibration cutting of hardwoods, while low TPI improves chip removal capacity for continuous longitudinal sectioning of softwoods.

Thick Material Slicing in One Pass

10°/7°/4° tooth angles correspond to different levels of cutting resistance. Reducing the rake angle lowers the instantaneous load on single-tooth cutting, allowing high-density or thick wood to be cut through in a single feed.

Applications

Timber processing industry: Used for longitudinal splitting of logs, cutting large-sized timber into boards or blanks.

Furniture manufacturing industry: Used for solid wood cutting, breaking down thick boards into multi-layered panels for structural component processing.

Wood products processing industry: Used for standardized board production, providing raw materials of consistent thickness.

Building timber structure industry: Used for splitting beams and structural timber, adapting large-section materials to construction size requirements.

Comprehensive Customization

Shipping & Delivery

About Us

第758-491页

Our Certificate

FAQ

Q: How to choose TPI (Thickness Per Pitch) based on wood type?

A: TPI determines the depth of cut per tooth and chip clearance space. For softwood or wet wood, a lower TPI (4/6) is preferred to improve chip clearance, while for hardwood, a higher TPI (8/14) is preferred to reduce impact load per tooth.

Q: What is the effect of saw blade width on longitudinal sectioning accuracy?

A: Width (10–16 mm) increases lateral bending stiffness and reduces trajectory deviation when internal stress in the wood is released, thus reducing cumulative cut skew.

Q: Why is saw jamming more likely in longitudinal sections than in cross sections?

A: Longitudinal sections cut along the fiber direction. The release of fiber tension generates continuous lateral forces. When the tooth pitch is too small or chip clearance is insufficient, chip accumulation further increases resistance, leading to jamming.

Contact now

Hot Tags: bandsaw blades for resawing wood, China bandsaw blades for resawing wood manufacturers, suppliers, factory, Bandsaw Blades for Resawing Wood, Carbide Tipped Bandsaw Blades for Wood, Tct Bandsaw Blade, Tungsten Carbide Bandsaw Blades, Portable Band Saw Blades for Wood, Bi metal Bandsaw Blades for Wood