Introduction

Diamond abrasive band saw blades are used for continuous cutting of hard and brittle materials such as graphite, quartz glass, ceramics, and some metals.

Specification

Feature	Details
Brand	SIPU Diamond Bandsaw Blade
Tooth Patterns	Wave, Serrated, Continuous, Diamond-shaped
Blade Material	Carbon Steel / Stainless Steel (heat-resistant & corrosion-resistant)
Compatible Materials	Graphite, quartz glass, jade, silicon carbide, ceramics, metals, etc.

Features

Dry and Wet Compatibility
The diamond abrasive and substrate structure maintain structural integrity at approximately 1900°C, allowing for material removal under the same grinding mechanism in both dry and water-cooled cutting.

High Adaptability
Continuous teeth are used for straight, continuous material removal; wave/saw teeth are used to increase unit contact pressure; semi-circular or diamond-shaped teeth are used for localized curves or detailed cutting, altering stress distribution through tooth geometry.

Adjustable Dimensions
Width and length can be adjusted within a small range (e.g., width ±5mm, length ±100mm) by changing the effective contact area and tension path.

Applications

Stone Processing Industry: Used for cutting and blanking granite, marble, and artificial stone, processing large raw materials into slabs or basic geometric shapes.

Electronics and Optical Materials Industry: Used for cutting quartz glass, sapphire, and ceramic substrates, providing a dimensional basis for subsequent grinding and polishing.

Hard and Brittle Materials Manufacturing Industry: Used for cutting and segmenting materials such as silicon carbide and graphite, achieving dimensional pre-treatment of sintered blanks or raw materials.

Precision Parts Machining Industry: Used for contour cutting of ceramic structural parts and wear-resistant components, reducing material allowance for subsequent finishing.

FAQ

Q: How to select the tooth profile based on processing requirements?

A: For large-volume straight-line cutting, continuous teeth are preferred. For materials with high hardness or under impact loads, wave-tooth or sawtooth structures are selected. For complex contours or localized machining, diamond/semi-circular tooth structures are chosen.

Q: How to choose between dry and wet cutting?

A: Dry cutting can be used for high-temperature or high-speed on-site machining. If it is necessary to reduce heat accumulation or extend abrasive contact time, water cooling or coolant-assisted cutting methods can be used.

Q: How to determine the band saw blade size?

A: The bandwidth and length need to be determined based on the saw wheel spacing, tension stroke, and power load of the equipment. Dimensional adjustments are made to match the tension allowance and contact length requirements of different equipment.

Hot Tags: diamond grit bandsaw blade, China diamond grit bandsaw blade manufacturers, suppliers, factory, Diamond Band Saw Blades Glass, Diamond Band Saw for Stone, 62 Inch Diamond Band Saw Blade, Diamond Wire Band Saw Blades, Diamond Grit Bandsaw Blade, Glass Cutting Band Saw Blade